One Way to Dye Your Own Carpets

One Way to Dye Your Own Carpets

Steam Room - One Way to Dye Your Own Carpets

Good evening. Yesterday, I learned about Steam Room - One Way to Dye Your Own Carpets. Which is very helpful in my opinion and also you.

The tan carpeting in #216 was shot.

What I said. It shouldn't be the conclusion that the real about Steam Room. You check this out article for home elevators an individual wish to know is Steam Room.

Steam Room

It was hopeless.

A new carpeting was needed.

That meant pulling up the old one, scraping off the pad, and then calling the carpeting man and shelling out 00 or more.

It wasn't anyone's fault.

The carpeting had served well.

But, upon closer examination, I decided it wasn't literally in that bad of shape.

It didn't have frayed edges, or worn down spots, and the nap was still pretty good. It just looked terrible. Bleach spots, stains, dark trails down the hallway and into the living room, and light spots where the sun had hit it on a daily basis straight through the windows.

No one would rent the apartment with a carpeting in that condition.

I steam cleaned it in hopes that it would be miraculously healed.

No such luck.

Then it hit me.

Why not try dyeing the bleached out spots to blend in with the carpet.

I purchased an 8 ounce bottle of Rit tan dye (the kind you use for dyeing clothes) at the drug store for , mixed a small in a spray bottle with steaming hot water, shook it up and sprayed the spots.

They came out a brassy brown, nothing like the color of the existing carpet.

I had the carpeting expertly steam cleaned. literally they could achieve a miracle.

Nope.

But I noticed that my dyeing job over the bleached out spots had maintained its primary color.

Then it occurred to me, why not try dyeing the entire carpeting to match the spots I had sprayed?

Two pictures came to mind on how I might do this.

I could mix the dye with hot water in my small steam cleaner (one like you would rent at the market) or I could use a pump up organery sprayer. I decided on the sprayer because the tenant below had suffered straight through adequate steam cleaning noise.

I purchased an Ace Sprayer for .

I mixed 8 tablespoons of dye into the 2 quarts of steaming hot water in the sprayer, screwed in the pump, shook up the contents and pumped it up.

I placed four 1"x 6" x 3' pieces of wood along the edges of the walls so as not to get dye on the white paint. I adjusted the nozzle on the sprayer to a fine spray and began.

I moved the boards as I dyed, but after a while as I became familiar with the sprayer, I didn't literally need them.

Also, after dyeing a section, and before reloading the sprayer, I used my small Bissell carpeting sweeper to even out the areas I had sprayed and work the dye into the carpet.

But still, the bleached out spots didn't match the ample carpeting color after I complete dyeing.

So the next day I applied another coat.

Better, but still not good enough.

Then I went back to the store for more dye, but they didn't have anymore tan. I went to three other stores, but no tan.

So, I bought Rit's dark brown dye.

This turned out to be a blessing in disguise.

I put 4 tablespoons of this darker dye into my 2 quarts of steaming hot water, pumped up the sprayer and applied another coat.

That's when the magic began to happen.

The darker brown literally kicked in.

The trails down the hallway disappeared, as did the light spots under the windows.

The carpeting started to look like a real carpeting again, but the bleached out spots still dyed a slightly darker shade than the rest of the carpet.

To compensate for this I dyed other parts of the carpeting darker by spraying more dye on them, and continued using my carpeting sweeper to even out the dye and work it into the nap. My goal was to blend all things together.

It worked... Somewhat.

I applied two coats of the dark brown dye, about worth of dye, over a 700 square foot area.

It was easy, and fun to do.

By the time I applied the second coat the carpeting looked practically new.

Because I've obsessed over the bleached out stains in the carpeting I can still find some of them, but not all. There is a small darkening in the carpeting where they once existed, but when a potential tenant came straight through to rent the apartment, and I explained to her what I had done, she glanced at it, said it looked fine, and went to look at the kitchen.

My daughter and my neighbor also viewed the carpeting and both stated it looked great, best than their own carpets.

But I know it's not perfect. It went from a D- or F to a C+/ B- or maybe even a B, and those grades literally depend on what angle you look at the carpeting from.

My father mentioned that the dye might be toxic.

I hadn't thought of that. I figured if you could dye your clothes with it you could literally do a carpet.

But to be safe I called Rit, the makers of the dye, and their representative assured me that all their dyes are non-toxic, but that they don't suggest using them on carpets because some of their customers have called and said the dye rubs off over time.

I went back up to #216, soaked a rag with steaming hot water, and tried to rub off the dye in any spots.

Nothing happened.

Maybe in time the dye will wear off in well traveled areas.

I'm not sure.

Time will tell.

But if it does wear off, and the carpeting is still usable, why not dye those areas again, like repainting walls, or staining wood doors and trim that taste wear and tear?

P.S. My daughter recommend that I consist of this following idea: Why not cut out a stencil of your beloved design, say a star or elephant, place it over the stain or bleached out spot, and then spray the dye into the stencil. A lot easier than dyeing the entire carpet!

Just a thought.

I hope you obtain new knowledge about Steam Room. Where you'll be able to put to use within your life. And above all, your reaction is passed about Steam Room. Read more.. One Way to Dye Your Own Carpets.

No comments:

Post a Comment